© Copyright 2024 Hydra Power, inc. 288 Indusrial Drive, Tazewell, VA 24630
Hydra Power
Low Profile Utility Vehicles and Equipment for the Mining Industry

Trickle Dusters

TD-200

TD-600

Specifications

Specifications

Length: 47 Inches Width: 30 Inches Height: 20 Inches Weight: 240 lbs.
Standard Voltage 220/440/3PH/60 Hz Hopper Capacity: 600 lbs. Rock Dust @ 80 lbs. per cu. ft. when level is full
Length: 52 Inches Width: 33 Inches Height: 34 Inches Weight: 300 lbs.
Standard Voltage 220/440/3PH/60 Hz Hopper Capacity: 600 lbs. Rock Dust @ 80 lbs. per cu. ft. when level is full
Discharge one pound per minute of rock dust through 50’ of 2” hose (up to 200’ optional) Trickle Dusters use a Transvector-type venturi that provides a large 1-½” opening for dust intake which prevents stopping up. Both models spray a mist of dust into the air along beltlines to meet dusting requirements. May be set in the intake air, with the hose running into the return air, eliminating the need for explosion-proof enclosures. Totally enclosed electric motor with starter and overload protection drives lobe-type blower. Air passing through the transvector picks up dust which has been aerated by a small amount of air passing through a nylon-covered air pad which causes the dust to flow like a liquid. The dust is propelled through a 50’ to 200’ of 2” hose to discharge into the airstream along beltlines, etc.
© Copyright 2024 Hydra Power, inc. 288 Industrial Drive North Tazewell, VA 24630
Hydra Power
Low Profile Utility Vehicles and Equipment for the Mining Industry
HOME HOME

Trickle Dusters

TD-200

Specifications

Length: 47 Inches Width: 30 Inches Height: 20 Inches Weight: 240 lbs.
Standard Voltage 220/440/3PH/60 Hz Hopper Capacity: 600 lbs. Rock Dust @ 80 lbs. per cu. ft. when level is full

TD-600

Specifications

Length: 52 Inches Width: 33 Inches Height: 34 Inches Weight: 300 lbs.
Standard Voltage 220/440/3PH/60 Hz Hopper Capacity: 600 lbs. Rock Dust @ 80 lbs. per cu. ft. when level is full
Discharge one pound per minute of rock dust through 50’ of 2” hose (up to 200’ optional) Trickle Dusters use a Transvector-type venturi that provides a large 1-½” opening for dust intake which prevents stopping up. Both models spray a mist of dust into the air along beltlines to meet dusting requirements. May be set in the intake air, with the hose running into the return air, eliminating the need for explosion-proof enclosures. Totally enclosed electric motor with starter and overload protection drives lobe-type blower. Air passing through the transvector picks up dust which has been aerated by a small amount of air passing through a nylon-covered air pad which causes the dust to flow like a liquid. The dust is propelled through a 50’ to 200’ of 2” hose to discharge into the airstream along beltlines, etc.